
Besser Block Retaining Walls in Wollongong


When the Load Gets Serious
Footings are poured to the engineer's specification with starter bars set to the block cores. Blockwork is laid true off that setout, reinforcement follows the schedule, and grouted cores lock the wall into one monolithic element. Finishes stay flexible: clean face block, bagged, rendered and painted, or clad in stone.
Site cuts are handled by our excavation and earthworks crew, and full drainage sits behind every wall. Once the wall is built, our landscaping team can finish the yard around it. To talk through your site with Retain by Theo, call 0417 661 224 for a free quote.
- Core-filled reinforced masonry
- Highest load capacity system
- Engineered footings and starter bars
- Rendered, bagged or face finishes
- Commercial and boundary walls
- Complete drainage detailing


Built for Heavy Loads
Besser block is what we reach for when a wall has to carry serious load, sit hard on a boundary, or form part of a structure that will also be built on. It is a slower system to build and a far stronger one when it is done properly.
- Reinforced concrete strip footings designed by an engineer
- Vertical starter bars tied into the footing and lapped through the wall
- Core-filled blockwork with horizontal reinforcement to specification
- Drainage cell, aggregate and ag-line behind the full wall face
- Rendered, bagged or face-block finish options
- Suits boundary walls, garage and pool surrounds and split-level builds

Frequently Asked Questions
Core filled reinforced masonry is the strongest system our team builds, which is why we use it for tall walls, driveway surcharge, pool zones and boundary structures doing structural duty. The certified engineering sets the bar sizes, spacings and grout strength for the actual load on your block.
We check that blockwork is plumb and true, joints are consistent, every core is fully grouted and the wall has cured before any coating goes on. Render applied over damp or poorly filled work maps cracks later. Drainage and weep holes are confirmed working first.
Cracking usually traces back to footing movement, missing control joints or water sitting behind the wall with nowhere to escape. Reactive clay across the Illawarra swells and shrinks with moisture. Our walls tie footing, steel and grouted cores into one element so the structure moves as a whole.
